• Facebook
  • Linked In
  • Youtube
Kingfit chillers
Turbocor Single Magnetic Bearing Chiller

The Turbocor single magnetic bearing chiller cooling system is a high-performance unit that provides efficient, reliable and safe operation which is widely used in the refrigeration system of the ...

Magnetic Bearing Chiller

Kingfit Oil Free Magnetic Bearing Chiller is equipped with a kind of oil-free magnetic bearing compressor, which made of high quality material and exquisite craftsmanship which are evident in ...

Turbocor Magnetic Bearing Chiller

The Turbocor Magnetic Bearing Chiller offers variable speed control and no need for oil. This revolutionary design makes it easy to maintain the temperature of your refrigeration system without ...

Big Magnetic Bearing Chiller Unit

The Big Magnetic Bearing Chiller Unit is a high – efficiency chiller that uses a single Hanbell compressor. It has a variable speed high efficient motor compared to any conventional ...

New Screw Style Water Chiller

This  Chiller is a flooded type, which makes it function with low noise and achieve high energy efficiency with a ratio up to 5.3. The evaporator is made of high-quality ...

Big Magnetic Bearing Centrifugal Water Chiller

It is an efficient cooling system that can be customized to meet your specific needs. This chiller uses multiple Hanbell compressors to provide the cooling capacity you need. It ...

What's the features of a magnetic bearing compressor compared with a screw compressor?

The magnetic bearings allow the compressor to operate without the use of oil for lubrication, which reduces energy losses due to friction and increases the heat transfer efficiency of the chiller, because no oil enters the evaporator or the condenser. A variable speed drive on the motor allows the compressor to operate much more efficiently at partial loads than standard compressors. The oil-free system also eliminates the need for oil maintenance, resulting in operations and maintenance savings. 

A screw chiller is a liquid chiller that uses two rotating helical screws to provide the needed pressure to drive the vapor-compression refrigeration process. The chiller is designed with a screw compressor as the main engine. The screw chiller technology in the industry is mature, and it is widely used in chemical, pharmaceutical, food, refrigeration, engineering construction, etc. They are available as both air-cooled and water-cooled models.

What type of maintenance does a magnetic bearing chiller need?

Basic maintenance should begin with quarterly inspections per the manufacturer’s operations manual. Maintenance technicians should inspect for condenser cleaning each season,refrigerant leaks check, pressures, and temperatures regularly. 

In addition, because the Magnetic bearing chillers have fewer moving parts they require no oil, nor oil-circulation equipment, and therefore require less maintenance and service. Over the life of the equipment – approximately 20 to 25 years – the total maintenance savings could be significant.

What's the cooling capacity of the magnetic bearing chiller do you have?

Available from 100 to 1000 tons, the Kingfit Magnetic bearing chiller offers the most comprehensive size range of oil-free magnetic bearing chillers.

Is this chillers variable speed control?

Yes. Kingfit offers a VSC chiller. Increased operating efficiencies, decreased energy consumption and lower operating costs are the primary benefits of specifying variable speed control (VSCs). However, those are just a few of the many advantages they bring to bear.

What's the benefits of using a Kingfit chiller in plastic processing?

The Kingfit Chiller is a stable and durable plastic chiller that is energy efficient. It features intelligent control that allows you to set the desired temperature for the most efficient production.

I have never heard of Kingfit before. Are you a new brand?

Kingfit was established in Wenzhou, Zhejiang, China in 1998. After more than 20 years of development and growth, we are now based in the beautiful Lishui, Zhejiang, and continue to expand to the three major markets of industry, commerce and agriculture, providing global customers with a large number of intelligent and energy-saving agricultural climates Solutions, temperature solutions and air conditioning systems for various industries. 

At present, our team consists of hundreds of passionate professionals, and we invest a lot of money in research and development every year to develop new products to meet the ever-changing needs of customers in different industries. 

FAW Group, Midea, Supor, CHNT, etc. are all our partners.

Can Kingfit provide OEM and ODM service?

Yes, both we can. 

We are very honored to be your OEM, and we have a first-class production team in China that can serve you. We also attach great importance to the spirit of contract, and you can rest assured to cooperate with us.

We are the supplier of many Chinese and overseas brands, and we are also very professional in this regard. We must be an ODM  worthy of your confidence, and we can customize your chillers according to your needs.

Send Your Inquiry Today
Scroll to Top