• Facebook
  • Linked In
  • Youtube
Kingfit chillers
Climate control machine-all in one

Cooling capacity range:8kw~76kw

Fan capacity range:1800m3/h~15000m3/h

Room temperature range:10C~30C

Mushroom mobile type cooling machine

Cooling capacity range:30kw~60kw

Fan capacity range:9500m3/h~18000m3/h

Room temperature range: 10C~30C

Mushroom air handling unit

Fan capacity range:12000m3/h~24000m3/h

Surface growing area control range:500m2~1000m2

Room temperature range:10C~30C

Containerized mushroom grow room

Room size:20ft/40ft

Shelf design: 2 rack rows,5beds

Room temperature range:10C~30C

Magnetic bearing chiller

Cooling capacity range:363kw~3464kw

Input power range:72kw~576kw

In/outlet water temperature:12C/7C

Screw chiller

Cooling capacity range:91.9kw~3461kw

Input power range:22.2kw~629.4kw

In/outlet water temperature:12C/7C

What kind of products can use Kingfit climate control system?

1. Mushrooms

2. Cannabis

3. Vegetables

4. Fruits

What Kind Of Mushrooms Can Be Indoor Farming?

White button mushroom/Champignon

Oyster mushroom

Eryngii/king oyster mushroom

Enoki mushroom

Shiitake mushroom

Shimeji mushroom

Yellow Oyster Mushroom

Flower Shiitake Mushroom

Seafood mushroom/needle mushroom/lily mushroom

Reishi mushroom

Maitake mushroom

Paddy Straw mushroom

Milky mushroom

Mini oyster mushroom

Nameko mushroom

Black fungus mushroom/Wood Ear Mushroom

Morel Mushroom

Lion’s mane mushroom


Cordyceps militaris

Tremella/Silver Tree Ear Mushroom (Yiner)

White Beech Mushroom

Brown Beech Mushroom

Portabella Mushrooms

Crimini Mushroom/Swiss Brown buttons

Abalone Mushroom

What Is The Growing Phases For Button Mushrooms?

1. Spawn run (Mycelium growth)

2. Cooling down

3. Pinning

4.1st/2nd/3rd Flush (Harvesting)

5. Cookout

6. Sub-Phase

What Kind Of Climate Parameters Should Be Control For High Quality Mushrooms?

1. Air Temperature

2.Compost/substrate temperature

3. Humidity (RH)


5. Light

6. Fresh air

7. Humidification

8. Dehumidification

What Kind Of Production Equipment Required For Wooden Fungi (Exotic Mushrooms) Plant Growing By Bottles?

1. Mixer

2. Conveyor

3. Bottle filling machine

4. Gantry basket robot

5. Sterilizer

6. Liquid Spawn tank

7. Inoculating machine

8. Cap remover

9. Scratching machine

10. Bottle washer

11. Bottle emptier

What Is The Main Parts Of An Air Handling Unit?

1. Fresh air damper

2. Return air damper

3. Air damper actuator

4. Pre-cooling/heating coil (option)

5. Cooling coil

6. Heating coil

7. Temperature probe (sensor)

8. Humidity probe (sensor)

9.CO2 probe (sensor)

10. Compost temperature probe(sensor)

11. Hot Galvanized Fan

12. Fan frequency inverter

13. Aluminium body

14. Stainless steel condensate water pan

15.F8 fresh air filters

What Is The Right Climate Parameters For Cannabis Indoor Farming?
  1. The right temperature

When the light is off (at night), the temperature should be 16-21 ° C (growth + flowering)

When the light is on (ie during the day), the temperature should be between 24-26 ° C, both during the growth phase and during the flowering phase

Ideal temperature in the root zone: 20 ° C

Ideal temperature in the nutrient tank (irrigation water) in hydroponic plants: 18-25 ° C

Ideal temperature for germination of cannabis seeds: 22-25 ° C

Lower temperatures below 20 ° C may delay germination and too high temperatures above 30 ° C will lead to worse germination results. Attention at hot outside temperatures!

Correct soil temperature for rooting cuttings: 25-27 ° C (ambient temperature is ideally 2 ° C lower)

Perfect temperature for drying cannabis: 18-24 ° C, the humidity should be 45-55%. At more than 70% humidity when drying cannabis there is an increased risk of mold growth. At over 25 ° C, the buds dry too quickly, which can cause loss of taste and effect.

  1. the right humidity

40-50% during flowering, day, and night

60% during the growth phase, day and night

60-70% humidity for cuttings, if this gets higher it can easily come to harmful fungal diseases like Pythium and Fusarium (-> mushy stems, withered, the plant dies)

Excessive humidity in the grow room, especially during flowering, can promote deleterious fungal and other pathogens and cause massive spreading.

  1. light cycles / photoperiod

The best results are achieved with the following lighting times:

Growth phase: 18 hours of illumination (light on), 6 hours of light off per day

Flowering phase: 12 hours lighting, 12 hours light off per day

Exposure time for mother plants and cuttings: 18-24 hours per day

The best light reflection offers: Mylar foil or white glossy plastic grow foil (black and white foil), less good light reflection for the cannabis plants brings: aluminum foil, mirrors, and white painted walls, there is insufficient and uneven light distribution

  1. atmospheric/climatic requirements

Cannabis plants need large amounts of oxygen, especially in the root zone and large amounts of CO2, especially on the undersides of the leaves

The grow room should ideally have a CO2 content of 1500 ppm (parts per million) instead of the naturally present proportion of 400 ppm. This requires enrichment with additional CO2, especially if the temperatures are higher.

  1. required air circulation

Each grow room, no matter how small, requires at least one fan for air circulation. One should feel the air movement in the grow room itself.

  1. Ventilation

The entire air in the grow room / grow box should be replaced with the help of the fan within 5-10 minutes, depending on the size of the grow box. For smaller cultivation spaces, the replacement should be rather faster. For this purpose, it is necessary to use a sufficiently strong fan depending on the size of your installation space.

  1. PH-Wert

Ideal pH of nutrient solution and medium in hydroponic systems: 5.5-6.5. In hydroponics, nutrients are already available for the plants available. If the pH of the nutrient solution is above 6.5 or below 5.5, it may be inferior and lead to deficiency symptoms.

Cuttings rooted best at a pH of 5-6

In aeroponic farming systems, cuttings are best at a pH between 5-5.5.

  1. Length of the individual phases:

Clones need about 2-5 weeks of growth time, some growers send cuttings immediately after they have rooted in the flower (12 hours lighting).

Seed plants need about 4-7 weeks of growth, depending on variety and cultivar

The flowering period of cannabis plants usually takes between 7 to 16 weeks for some sativas.

Cannabis seeds take about 55-72 hours (depending on variety and environmental conditions) until the first white root tip appears.

  1. Yields on cannabis cultivation (dry buds)

The yield that can be achieved in indoor cannabis cultivation depends to a large extent on all environmental conditions, the variety, the type of cultivation, and the duration of the flowering and can vary accordingly.

If you have more content want to put in this page, you can also put here. This is function is really cool.

Send Your Inquiry Today
Scroll to Top